Art derivatives & designer toys
Art derivatives and designer toys, produced from one master model.
- Shanghai Xionglan Culture Communication Co., Ltd. (brand: Xionglan Art)
- Shanghai-based workshop · delivery in 67 Chinese cities
- 10 capability groups / 102 individual techniques · design, fabrication and installation in-house
- Phone +86 156 0163 6249 · Mon–Sun 09:00–18:00 (CST)
Derivative ranges live or die on consistency: every size and every material must look like the same object. Working from a single approved master file keeps a keyring and a metre-high figure recognisably related.
Commissioned work in art derivatives & designer toys normally runs from 6 to 30 m², with 4–10 working days in production from approved drawings. The reference range for this technique is CNY 80+ per m², quoted itemised. It sits within our 3D Printing & Digital Fabrication capability, alongside 9 related techniques, and the 4-point deliverable below is what a commission includes as standard.
When art derivatives & designer toys is the right answer - and when it is not
Printed merchandise and derivatives are chosen where a brand, character or artwork needs a physical product for sale or promotion, usually across several sizes and a defined quantity. They suit brand licensing, retail product, promotional gifts and event merchandise. The design constraints are cost per unit, consistency across the run, and safety for whatever audience will handle the product. The usual division of labour is that printing takes the shape and the base colour, while the details that define the product at arm's length - finish, surface feel, weight - are decided by the process and the material rather than by the artwork, which is why the sample matters more here than the render.
How the work is actually carried out
The design is simplified for the process, since printable detail that costs nothing in a render adds cost and fragility to every unit. Colours are resolved by printing in the base tone and finishing, or by multi-material printing where the volume justifies it. A sample run is produced and reviewed before the batch, because this is the only reliable way to check colour, weight and finish in hand. Packaging and labelling are planned with the product, since merchandise is judged on the object and the pack together. Anything handled by children is checked against the applicable safety requirements for small parts, edges and coatings before the artwork is finalised, and the production file is retained so a later reprint matches the first run rather than being re-created from the design.
Typical applications
Typical specifications
| Production | Resin casting, vinyl, printed and hand-finished editions |
|---|---|
| Edition size | From a single artist proof to runs of thousands |
| Finishes | Painted, metallic, translucent, flocked |
| Lead time | 3-10 weeks |
| Capability | 3D Printing & Digital Fabrication |
| Reference range | CNY 80+ per m² |
| Techniques in this capability | 10 |
| Coverage | Shanghai base, nationwide delivery, overseas projects on request |
Reference price bands for Art derivatives & designer toys
Indicative only, based on the scope normally quoted for art derivatives & designer toys. A firm price follows a site survey and an itemised quotation split into material, labour, finishing, packing and freight.
| Pricing basis | Priced per piece or per project rather than per square metre |
|---|---|
| Reference range | CNY 80+ per m² |
| How we quote | Itemised: material, labour, finishing, packing and freight shown as separate lines |
Build tiers for art derivatives & designer toys
Art derivatives & designer toys is not one product at one size: the table below is the same scope ladder we quote on, so you can see where your project sits before asking for a price.
| Build tier | Typical area | Production days | What changes at this tier |
|---|---|---|---|
| Tier 1 | 6–30 m² | 3–8 | Up to 30 m², one substrate and one access setup, 3–8 days in the workshop. |
| Tier 2 | 6–30 m² | 10–20 | 6–30 m² across two or more faces, 10–20 days, substrate build-up agreed per location. |
| Tier 3 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 4 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 5 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 6 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 7 | 6–30 m² | 3–8 | 6 m² and above, multiple substrate types and phased access, 3–8 days with a join and numbering plan. |
What we deliver
- Digital modelling from sketches, scans or reference images
- Large-format printing, section splitting and structural joining
- Sanding, priming, painting and surface texturing
- Master-pattern printing for subsequent casting
Faults we see most often in art derivatives & designer toys
Each of these is a field failure rather than a workshop one, and each is cheaper to prevent at enquiry stage than to correct after installation.
- Designing detail that adds cost and fragility to every unit without being visible at the product's actual size.
- Going straight to a full batch without a sample, when the hand-feel and colour of a product cannot be judged from a screen.
- Designing the object and forgetting the packaging, which is often the first thing a customer actually judges.
What to settle before an overseas project starts
| Quantity and sizes | Tell us the run and the size range. Both drive the process choice and the unit cost. |
|---|---|
| Colour and finish | Send brand colours and any material reference. Printed colour needs a physical sample approved, always. |
| Safety and audience | Tell us who handles the product - and particularly if it is for children, which brings small-part and material rules into play. |
Working with us from overseas
Enquiry to installation, one point of contact. Export packing, shipping, commercial terms and quality control →
Design intent and what drives the cost
| Technique | Art derivatives & designer toys |
|---|---|
| Positioning | Art derivatives and designer toys, produced from one master model. |
| Floor area normally quoted | 6–30 m² per commission |
| Typical production window | 4–10 working days from approved drawings |
| Main cost drivers | Area and repetition; substrate preparation; detail and modelling time; surface finish; access and working hours |
| What we quote separately | Material, labour, finishing, packing, freight and site measures - each as its own line |
Representative work
3D Printing & Digital Fabrication projects photographed on completion.
3D Printing & Digital Fabrication — Art derivatives & designer toys
3D Printing & Digital Fabrication — Digital sculpture modelling
3D Printing & Digital Fabrication — Large-scale 3D-printed sculpture
3D Printing & Digital Fabrication — 3D printing material selectionCommon questions
Can you produce a limited edition?
How do you keep colour consistent across a run?
What is the maximum size of a single printed part?
Discuss art derivatives & designer toys
Send photographs, drawings or a 3D file with approximate dimensions. You will get a technique recommendation, a reference price band and a production schedule.