Night-tour light installation
Night-tour installations that extend visiting hours after dark.
- Shanghai Xionglan Culture Communication Co., Ltd. (brand: Xionglan Art)
- Shanghai-based workshop · delivery in 67 Chinese cities
- 10 capability groups / 102 individual techniques · design, fabrication and installation in-house
- Phone +86 156 0163 6249 · Mon–Sun 09:00–18:00 (CST)
Night-tour work turns a daytime attraction into an evening one, and it has to hold attention while visitors are moving and in low light. Route, pacing and darkness are the design materials, not just the light fittings.
Commissioned work in night-tour light installation normally runs from 76 to 739 m², with 3–8 working days in production from approved drawings. The reference range for this technique is CNY 2–15 per m², quoted itemised. It sits within our Visual Merchandising & Installations capability, alongside 9 related techniques, and the 4-point deliverable below is what a commission includes as standard.
When night-tour light installation is the right answer - and when it is not
Night tourism installations are chosen to give a destination a reason to be visited after dark, which means the entire value proposition depends on the evening experience. They suit scenic areas, cultural districts, parks and destinations with existing daytime traffic. They depend on darkness and on the visitor route being safe and legible at night, so they are as much an infrastructure project as a decorative one.
How the work is actually carried out
The route is designed first - where visitors enter, walk, pause and leave - and the installations are placed along it to pace the experience rather than cluster it. Each piece is designed for the viewing distance and the ambient darkness at its specific point, since a light level that reads well in a dark lane is lost in a lit plaza. Materials and fixtures are specified for permanent outdoor exposure, and power distribution and safety lighting are planned as part of the scheme. Capacity and crowd flow are considered at concept stage.
Typical applications
Typical specifications
| Typical route | 300 m to 3 km of lit experience |
|---|---|
| Lead time | 8-16 weeks including programming and testing |
| Systems | IP65+ exterior lighting, DMX control, show playback |
| Safety | Egress lighting and route marking to statutory requirements |
| Capability | Visual Merchandising & Installations |
| Reference range | CNY 2–15 per m² |
| Techniques in this capability | 10 |
| Coverage | Shanghai base, nationwide delivery, overseas projects on request |
Reference price bands for Night-tour light installation
Indicative only, based on the scope normally quoted for night-tour light installation. A firm price follows a site survey and an itemised quotation split into material, labour, finishing, packing and freight.
| Pricing basis | Priced per piece or per project rather than per square metre |
|---|---|
| Reference range | CNY 2–15 per m² |
| How we quote | Itemised: material, labour, finishing, packing and freight shown as separate lines |
Build tiers for night-tour light installation
Night-tour light installation is not one product at one size: the table below is the same scope ladder we quote on, so you can see where your project sits before asking for a price.
| Build tier | Typical area | Production days | What changes at this tier |
|---|---|---|---|
| Tier 1 | 6–30 m² | 3–8 | Up to 30 m², one substrate and one access setup, 3–8 days in the workshop. |
| Tier 2 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 3 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 4 | 5–20 m² | 3–8 | 5–20 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 5 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 6 | 500–5000 m² | 3–8 | 500–5000 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 7 | 6–30 m² | 3–8 | 6 m² and above, multiple substrate types and phased access, 3–8 days with a join and numbering plan. |
What we deliver
- Concept and merchandise layout matched to the site's footfall routes
- Rigging design, load checks and coordination with mall management
- Fabrication, trial assembly in the workshop, then night-time install
- Storage, re-use planning and dismantling after the season
Faults we see most often in night-tour light installation
Each of these is a field failure rather than a workshop one, and each is cheaper to prevent at enquiry stage than to correct after installation.
- Designing each installation in isolation, so the route has no pacing and visitors exhaust the experience in the first hundred metres.
- Specifying the same light output everywhere, ignoring the big differences in ambient darkness along the route.
- Treating the project as decoration without addressing route safety, power and crowd capacity.
What to settle before an overseas project starts
| Route and pacing | Send a plan with the intended walk. We will help place the installations so the experience builds rather than repeats. |
|---|---|
| Ambient darkness per point | Light levels vary enormously along a route. Photographs of each location at night are the working brief. |
| Power and safety | Confirm the power available at each point and who is responsible for route lighting and safety. Both must be planned in. |
Working with us from overseas
Enquiry to installation, one point of contact. Export packing, shipping, commercial terms and quality control →
Design intent and what drives the cost
| Technique | Night-tour light installation |
|---|---|
| Positioning | Night-tour installations that extend visiting hours after dark. |
| Floor area normally quoted | 76–739 m² per commission |
| Typical production window | 3–8 working days from approved drawings |
| Main cost drivers | Area and repetition; substrate preparation; detail and modelling time; surface finish; access and working hours |
| What we quote separately | Material, labour, finishing, packing, freight and site measures - each as its own line |
Representative work
Visual Merchandising & Installations projects photographed on completion.
Visual Merchandising & Installations — Atrium hanging installation
Visual Merchandising & Installations — Interactive sensor installation
Visual Merchandising & Installations — IP collaboration VM
Visual Merchandising & Installations — Chinese New Year VMCommon questions
Will it disturb wildlife or neighbours?
Can it run every night?
Can installation work be done overnight so trading is not interrupted?
Discuss night-tour light installation
Send photographs, drawings or a 3D file with approximate dimensions. You will get a technique recommendation, a reference price band and a production schedule.