Animal & mascot sculpture
Animal and mascot sculpture, including licensed IP characters.
- Shanghai Xionglan Culture Communication Co., Ltd. (brand: Xionglan Art)
- Shanghai-based workshop · delivery in 67 Chinese cities
- 10 capability groups / 102 individual techniques · design, fabrication and installation in-house
- Phone +86 156 0163 6249 · Mon–Sun 09:00–18:00 (CST)
Mascot work is judged on character: proportion, expression and the small asymmetries that make a figure feel alive. Where the character is licensed, colour and detail must also meet the rights holder's standards.
Commissioned work in animal & mascot sculpture normally runs from 6 to 30 m², with 6–15 working days in production from approved drawings. The reference range for this technique is CNY 0+ per m², quoted itemised. It sits within our Sculpture Fabrication capability, alongside 13 related techniques, and the 4-point deliverable below is what a commission includes as standard.
When animal & mascot sculpture is the right answer - and when it is not
Animal and character sculpture is chosen where a place or a brand needs an approachable, memorable focal point - mascots, themed figures, wayfinding characters, children's environments. It suits retail, attractions, parks and family-focused spaces. The constraints are different from fine art: the piece must be robust, safe at child height, and reproducible if the character is a brand asset, so the material and finish follow from that, not from sculpture convention alone.
How the work is actually carried out
The character is modelled from whatever the brand reference allows - existing artwork, a style guide, or a maquette - and the proportions are adjusted for three dimensions, since a design that works as a two-dimensional mark often reads oddly as a solid. The production method follows the quantity: one piece may be sculpted directly, while a run uses a master pattern and moulds for consistency. Rounded edges, no accessible sharp points and a finish that survives being touched and climbed are all designed in, and the fixings are specified for the exposure and the number of copies required.
Typical applications
Typical specifications
| Materials | FRP, GRC, stainless, bronze |
|---|---|
| Scale | From 0.3 m collectible scale to 6 m+ outdoor figures |
| Finishes | Painted, metal-effect, hair or flock detailing |
| Licensing | Work to the rights holder's colour and detail specification |
| Capability | Sculpture Fabrication |
| Reference range | CNY 0+ per m² |
| Techniques in this capability | 14 |
| Coverage | Shanghai base, nationwide delivery, overseas projects on request |
Reference price bands for Animal & mascot sculpture
Indicative only, based on the scope normally quoted for animal & mascot sculpture. A firm price follows a site survey and an itemised quotation split into material, labour, finishing, packing and freight.
| Pricing basis | Priced per piece or per project rather than per square metre |
|---|---|
| Reference range | CNY 0+ per m² |
| How we quote | Itemised: material, labour, finishing, packing and freight shown as separate lines |
Build tiers for animal & mascot sculpture
Animal & mascot sculpture is not one product at one size: the table below is the same scope ladder we quote on, so you can see where your project sits before asking for a price.
| Build tier | Typical area | Production days | What changes at this tier |
|---|---|---|---|
| Tier 1 | 6–30 m² | 25–60 | Up to 30 m², one substrate and one access setup, 25–60 days in the workshop. |
| Tier 2 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 3 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 4 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 5 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 6 | 6–30 m² | 3–8 | 6–30 m² across two or more faces, 3–8 days, substrate build-up agreed per location. |
| Tier 7 | 6–30 m² | 3–8 | 6 m² and above, multiple substrate types and phased access, 3–8 days with a join and numbering plan. |
What we deliver
- Concept sketches and a scaled maquette for sign-off
- Structural calculation and internal armature where required
- Fabrication, welding, surface finishing and protective coating
- Delivery, on-site assembly and foundation coordination
Faults we see most often in animal & mascot sculpture
Each of these is a field failure rather than a workshop one, and each is cheaper to prevent at enquiry stage than to correct after installation.
- Scaling a two-dimensional character straight into three dimensions, which produces something that looks wrong from every angle but the front.
- Under-building a piece that children will climb, where the loads are far higher than adults expect.
- Moulding from a master that was not finished to production standard, so every copy inherits the same flaw.
What to settle before an overseas project starts
| Brand or character reference | Send the style guide and any restrictions on how the character may be depicted. It shapes the design more tightly than most sculpture briefs. |
|---|---|
| Quantity and consistency | Tell us how many and where they go. Multiple copies need a master and moulds, and consistency becomes the main requirement. |
| Safety and public contact | Tell us if children will touch or climb it. Edge radius, load and finish all follow from that answer. |
Working with us from overseas
Enquiry to installation, one point of contact. Export packing, shipping, commercial terms and quality control →
Design intent and what drives the cost
| Technique | Animal & mascot sculpture |
|---|---|
| Positioning | Animal and mascot sculpture, including licensed IP characters. |
| Floor area normally quoted | 6–30 m² per commission |
| Typical production window | 6–15 working days from approved drawings |
| Main cost drivers | Area and repetition; substrate preparation; detail and modelling time; surface finish; access and working hours |
| What we quote separately | Material, labour, finishing, packing, freight and site measures - each as its own line |
Representative work
Sculpture Fabrication projects photographed on completion.
Sculpture Fabrication — Cast bronze sculpture
Sculpture Fabrication — Mirror-polished stainless sculpture
Sculpture Fabrication — Animal & mascot sculpture
Sculpture Fabrication — Stone sculptureCommon questions
Do you work with licensed IP?
Which material suits a mascot outdoors?
How long does a large sculpture take end to end?
Discuss animal & mascot sculpture
Send photographs, drawings or a 3D file with approximate dimensions. You will get a technique recommendation, a reference price band and a production schedule.
Other techniques in this capability
- Mirror-polished stainless sculpture
- Brushed stainless sculpture
- Coloured stainless sculpture
- Perforated stainless sculpture
- Cast bronze sculpture
- Forged copper sculpture
- Stone sculpture
- FRP & resin sculpture
- Cement / GRC sculpture
- Figure sculpture
- Abstract sculpture
- Landmark sculpture
- Garden & landscape sculpture